ssh_tunnel statistics: david-covey to vorkosigan
Time: 2013-Jun-19 04:50:53 Wed
Current tunnel state: disabled Current tunnel condition: DOWN
loader stats
------ loader (pid: 23580 ) ------------ (v3.31 2006/05/29) ----- State: disabled DOWN
Time: 2013-Mar-10 00:00:39 Sun
client: david-covey
server: vorkosigan
client heartbeat: Client Heartbeat
server heartbeat: Server Heartbeat
server heartbeat 1: Server Heartbeat 1
server heartbeat 2: Server Heartbeat 2
server heartbeat 3: Server Heartbeat 3
server heartbeat 4: Server Heartbeat 4
Sleep time: 226
loader loop counter: 0
bad port tests: 0 last: none yet
failed file updates: 1 last: 2013-Mar-10 00:00:33 Sun
tunnels killed: 3 last: 2013-Mar-10 00:00:38 Sun
emails sent: 1 last: 2013-Mar-10 00:00:36 Sun
email addresses: theClaw56@larsen-family.us
loader started: YYYY-MMM-DD HH:MM:SS DOW
debug flags: 0x1300000
tunnel stats
------ tunnel (pid: 2428 ) ------------ (v3.31 2006/05/29) ----- State: enabled UP
Time: 2007-Feb-10 17:17:27 Sat
client: david-covey
server: vorkosigan
client heartbeat: Sat Feb 10 17:13:40 EST 2007
server heartbeat: Sat Feb 10 17:15:31 EST 2007
Sleep time: 226
tunnel loop counter: 2
bad port tests: 0 last: none yet
emails sent: 1 last: 2007-Feb-10 17:13:06 Sat
email addresses: theClaw56@larsen-family.us
tunnel started: 2007-Feb-10 17:13:39 Sat
debug flags: 0x1300000
Current users, uptime, and load average
04:50:55 up 7 days, 1:09, 0 users, load average: 0.00, 0.00, 0.00
USER TTY LOGIN@ IDLE JCPU PCPU WHAT
Current processes
UID PID PPID C STIME TTY TIME CMD
SYSTEM 1840 1 0 Jun12 ? 00:00:03 /usr/bin/cygrunsrv
SYSTEM 1872 1840 0 Jun12 ? 00:00:33 /usr/sbin/cron -D
SYSTEM 1960 1 0 Jun12 ? 00:00:03 /usr/bin/cygrunsrv
SYSTEM 2024 1960 0 Jun12 ? 00:00:04 /usr/sbin/sshd -D
SYSTEM 531028 1872 0 04:50 ? 00:00:00 /USR/SBIN/CRON -D
Covey 530480 1 2 04:50 ? 00:00:00 /usr/bin/perl -w /home/jlarsen/ssh_tunnel/vorkosigan/ssh_tunnel.pl
Covey 531664 530480 0 04:50 ? 00:00:00 /usr/bin/procps -edf
Current netstat
Active Connections
Proto Local Address Foreign Address State
TCP David-Covey:1716 a23-50-116-42.deploy.akamaitechnologies.com:https CLOSE_WAIT
TCP David-Covey:1765 a23-50-116-42.deploy.akamaitechnologies.com:https CLOSE_WAIT
TCP David-Covey:1784 a23-5-48-60.deploy.akamaitechnologies.com:https CLOSE_WAIT
TCP David-Covey:1886 a23-79-68-42.deploy.akamaitechnologies.com:https CLOSE_WAIT
TCP David-Covey:1887 a23-79-68-42.deploy.akamaitechnologies.com:https CLOSE_WAIT
TCP David-Covey:1889 a23-50-116-42.deploy.akamaitechnologies.com:https CLOSE_WAIT
TCP David-Covey:2037 a23-50-116-42.deploy.akamaitechnologies.com:https ESTABLISHED
TCP David-Covey:2041 localhost:21322 TIME_WAIT
TCP David-Covey:2042 localhost:21322 TIME_WAIT
TCP David-Covey:2043 localhost:21322 TIME_WAIT
TCP David-Covey:2044 localhost:21322 TIME_WAIT
TCP David-Covey:2045 localhost:21322 TIME_WAIT
TCP David-Covey:2046 localhost:21322 TIME_WAIT
TCP David-Covey:2047 localhost:21322 TIME_WAIT
TCP David-Covey:2048 localhost:21322 TIME_WAIT
TCP David-Covey:2049 localhost:21322 TIME_WAIT
TCP David-Covey:2050 localhost:21322 TIME_WAIT
TCP David-Covey:2051 localhost:21322 TIME_WAIT
TCP David-Covey:2052 localhost:21322 TIME_WAIT
TCP David-Covey:knetd localhost:21322 TIME_WAIT
TCP David-Covey:2054 localhost:21322 TIME_WAIT
TCP David-Covey:2055 localhost:21322 TIME_WAIT
TCP David-Covey:2057 localhost:21322 TIME_WAIT
TCP David-Covey:2058 localhost:21322 TIME_WAIT
TCP David-Covey:2059 localhost:21322 TIME_WAIT
TCP David-Covey:2060 localhost:21322 TIME_WAIT
TCP David-Covey:2062 localhost:21322 TIME_WAIT
TCP David-Covey:2063 localhost:21322 TIME_WAIT
TCP David-Covey:2064 localhost:21322 TIME_WAIT
TCP David-Covey:4991 localhost:40000 ESTABLISHED
TCP David-Covey:21322 localhost:2061 TIME_WAIT
TCP David-Covey:40000 localhost:4991 ESTABLISHED
crontab file
# DO NOT EDIT THIS FILE - edit the master and reinstall.
# (/tmp/crontab.1764 installed on Sat May 13 20:26:01 2006)
# (Cron version -- $Id: crontab.c,v 1.8 2004/12/21 16:14:41 corinna Exp $)
MAILTO=john@larsen-family.us
# ssh_tunnel to vorkosigan
0,10,20,30,40,50 * * * * /home/jlarsen/ssh_tunnel/vorkosigan/ssh_tunnel.pl
loader.conf file
# Filename: loader.conf
# Description: This is the configuration file for the loader portion of the
# ssh_tunnel program. The contents of this file never change. This insures
# that the loader will always operate. It is important not to change the
# formatting of this file because it is read by the ssh_tunnel and processed
# using perl which is expecting things to be in certain locations.
#
# loader.conf has two sections:
# 1. Configuration information such as the names of the ssh and sshd
# hosts, the working directories on each host, and other data as needed.
# 2. The ssh host configuration for the loader program is in this file.
# That configuration should never change. It needs to be at the end
# of the file because ssh uses everything between "Host" entries as
# configuration. There is only one Host section in this file.
#
########################################################################
# The following section contains host information
# SSH_CLIENT david-covey
# SSH_CLIENT_DIR /home/jlarsen/ssh_tunnel/vorkosigan
# SSH_SERVER vorkosigan
# SSH_SERVER_DIR /home/jlarsen/ssh_tunnel/david-covey
#
########################################################################
# The following section is the ssh config file for the loader program.
# IMPORTANT! The path on the client MUST have the SSH_SERVER name in
# it. The script uses this name is search strings and it MUST be there.
Host loader
HostName larsen-family.us
Port = 21
UserKnownHostsFile = /home/jlarsen/ssh_tunnel/vorkosigan/known_hosts
User = jlarsen
IdentityFile = /home/jlarsen/ssh_tunnel/vorkosigan/id_rsa.covey
tunnel.conf file
# Filename: tunnel.conf
#
# Description: This is the configuration file for the tunnel portion of the
# ssh_tunnel program. The contents of this file can be changed during program execution.
# It is important not to change the formatting of the file because it is read by the
# tunnel program and processed using awk which is expecting things to be in certain
# locations.
#
# tunnel.conf has three sections:
# 1. Configuration information such as email addresses and thresholds.
# 2. The ssh host configuration for the tunnel. This consists of two
# host definitions, tunnel and heartbeat. The tunnel is the permanent
# connection and defines port forwarding. The heartbeat uses one of
# the forwarded ports to write and copy heartbeat files between the
# ssh client and the ssh server. Changing heartbeats indicate that the
# tunnel is functioning.
# 3. The webpage configuration section as described below. This has the
# ssh host configuration for updating a webpage on a webserver.
#
################################################################################
# The following section contains configuration information
#
# The tunnel is either "enabled" or "disabled" based on the value given
# below. If disabled, then no processes are running on either the
# client or the server. A cron job on the client runs ssh_tunnel.pl periodically
# to check if tunnel.conf has changed on the server. If a change is detected
# then the new tunnel.conf file is transfered over. If the tunnel state
# becomes "enabled" then the tunnel is activated.
# TUNNEL_STATE disabled
#
# The email addresses below receive diagnostic messages. Separate
# multiple addresses with commas and no white space. The word "none"
# turns off email sending and is the default. The same email address
# is used by cron, loader, tunnel, and pulse.
# EMAIL_ADDRESS theClaw56@larsen-family.us
#
# The threshold defined below is how many port failures are required
# before an email is sent. Set this to "none" to turn this off. If
# the ssh_server's ssh port isn't accessible then the loader kills
# the tunnel. This periodic email serves as a reminder that the tunnel
# is down.
# EMAIL_THRESHOLD 200
#
# The loader, tunnel, and pulse programs all have the same sleep value.
# The sleep time can be changed here. It should be in the range of
# 60 to 3600 seconds. Shorter sleep times increase system loading.
# The sleep time must be less than half the crontab time for ssh_tunnel.pl.
# SLEEP_TIME 226
#
#
################################################################################
# The following section is the ssh config file for the tunnel program.
# IMPORTANT! The path on the client MUST have the SSH_SERVER name in
# it. The script uses this name is search strings and it MUST be there.
#
# Important info about port numbers used in the "ssh_tunnel" and "heartbeat"
# sections below. The "heartbeat" Port number must be the same as the last
# two port numbers in the "ssh_tunnel" section. In this example 50022 is
# used. The port number used must be unused by anything else on the two
# machines. If you have multiple tunnels connecting to a single ssh_server
# be sure to use different port numbers.
#
# Another requirement is that the ssh_server must be configured to
# allow remote port forwarding. This is normally off by default in the
# ssh_server's sshd_config file. Set "GatewayPorts yes" in sshd_config.
#
Host tunnel
HostName larsen-family.us
Port = 21
UserKnownHostsFile = /home/jlarsen/ssh_tunnel/vorkosigan/known_hosts
User = jlarsen
IdentityFile = /home/jlarsen/ssh_tunnel/vorkosigan/id_rsa.covey
Compression = yes
RemoteForward = 17902 wr-fam-nh:5905
RemoteForward = 17023 paul-otto:5907
RemoteForward = 17024 david-covey:5906
RemoteForward = 17225 fs-beast:22
RemoteForward = 17022 david-covey:22
LocalForward = 17022 vorkosigan:22
################################################################################
Host heartbeat
HostName localhost
Port = 17022
UserKnownHostsFile = /home/jlarsen/ssh_tunnel/vorkosigan/known_hosts
User = jlarsen
IdentityFile = /home/jlarsen/ssh_tunnel/vorkosigan/id_rsa.covey
################################################################################
Host pulse
HostName localhost
Port = 17022
UserKnownHostsFile = /home/jlarsen/ssh_tunnel/david-covey/known_hosts
User = covey
IdentityFile = /home/jlarsen/ssh_tunnel/david-covey/id_rsa.covey
################################################################################
# Note: This section must be last in tunnel.conf.
# A webpage will be copied to the directory set by WEBSERVER_DIR below. The
# default value "none" turns this feature off. Change "none" to the directory
# path where the webpage should be copied. The "webpage" host information
# below must also be changed to valid values to make this work.
# WEBSERVER_DIR /home/tunnels/ssh_tunnel_html
#
# The filename of the webpage copied to the webserver defaults to
# SSH_CLIENT_to_SSH_SERVER.html. To choose a different name replace the
# word "default" on the line below with the desired name.
# WEBPAGE_FILENAME default
#
# A copy of the webpage can be put in the directory define by WEBPAGE_LOCAL_DIR.
# Change "none" to a valid directory to enable this feature.
# WEBPAGE_LOCAL_DIR none
#
# The webpage update rate defaults to once per sleep time. Change the value below
# to select a different rate. The update rate is the number of times through the
# loader while loop before updating the webpage. This value is ignored when events
# occur such as the tunnel going down or during startup. The webpage is updated
# for all non normal runtime events.
# WEBPAGE_UPDATE_RATE 1
#
Host webpage
HostName larsen-family.us
Port = 22
UserKnownHostsFile = /home/jlarsen/ssh_tunnel/vorkosigan/known_hosts.webpage
User = tunnels
IdentityFile = /home/jlarsen/ssh_tunnel/vorkosigan/id_rsa.covey